BOX DESAL SWRO · FACTORY-INTEGRATED SEAWATER RO

SWRO300
300m³/day

A source-confirmed containerized platform with model-specific feed, membrane, pressure-vessel, high-pressure, energy-recovery, filtration and CIP references.

View reference data Request project proposal

DELIVERY FORMAT1 × 40 ft

CWG illustration of the BOX DESAL SWRO 100–400 containerized plant family

BOX DESAL SWRO 300100–400 FAMILY ILLUSTRATION · MODEL PHOTO PENDING

REFERENCE PRODUCT12.5m³/h18 membranes12–18 weeks

300m³/dayNOMINAL PRODUCT WATER

750m³/dayREFERENCE FEED FLOW

18× 8 × 40SWRO MEMBRANES

3 × 1,200 psiPRESSURE VESSELS

40% nominalREFERENCE RECOVERY

MODEL-SPECIFIC REFERENCE DATA

Confirmed equipment basis for concept development.

These values belong specifically to BOX DESAL SWRO 300. They support preliminary comparison; the final equipment schedule is released only after the water and project duty are approved.

Start engineering review

Product water300m³/day

Hourly product12.5m³/h

Feed flow750m³/day

Feed pump31.25 m³/h at 4 bar

Design flux16.9 LMH

Membranes18× 8 × 40 SWRO

Pressure vessels3 × 1,200 psi

High-pressure section12.5 m³/h at 60–64 bar

Energy recovery18.75 m³/h at 58–62 bar

Multimedia filters1 × 63 × 86 FRP

CIP20 m³/h · 500 L

Container arrangement1 × 40 ft

Reference lead time12–18 weeks

Approved net price · EXW Croatia€193,180

REFERENCE PLANT SCOPE

Integrated treatment inside the delivery boundary.

The model platform combines the main process sections required for a maintainable containerized seawater plant.

Request detailed scope

Feed & filtration

Duty/standby feed pumping, multimedia filtration and cartridge filtration.

Chemical conditioning

SMBS and antiscalant dosing with tank, level and control references.

High-pressure SWRO

18 membranes in 3 pressure vessels with a 12.5 m³/h at 60–64 bar HP section.

Energy recovery

Reference operating point: 18.75 m³/h at 58–62 bar.

CIP & automation

20 m³/h · 500 L CIP reference with PLC/HMI, instruments, alarms and flushing logic.

Container services

Interior lining, air conditioning, internal piping, cabling and equipment access.

EXPANDED COMPONENT RECORD

Additional details confirmed for this model.

The detailed source sheet for BOX DESAL SWRO 300 confirms model-specific dosing and filtration references. These values are not transferred to other BOX sizes.

SMBS dosing2 L/h at 7 bar

One on/off dosing pump, 100 L tank and level control reference.

Antiscalant dosing2 L/h at 7 bar

One on/off dosing pump, 100 L tank and level control reference.

63 × 86 filter mediaPer applicable tank

2,000 kg quartz and 500 kg anthracite source reference.

Filter pressure2–6 bar working

9 bar test-pressure reference with electrically actuated valve control.

DOCUMENTATION STATUS

100–400 family reference drawing

The supplied drawing depicts a shared 20-foot container concept with outer dimensions of 6,058 × 2,438 × 2,591 mm. The product reference lists a 40-foot delivery arrangement, so the drawing does not establish this model’s final container size or layout. Its equipment arrangement may change for each capacity. A verified model photo, approved model-specific GA, P&ID, foundation, electrical and connection drawings remain required before design freeze.

Shared BOX DESAL SWRO 100–400 concept drawing showing plan, side and end views of a 20-foot container — Shared 20-foot concept drawing · open full size · the 40-foot model arrangement requires confirmation

CONTAINER ARCHITECTURE

1 × 40-foot reference arrangement

The process is referenced inside one container. Equipment access, clear service routes and maintainability must be verified before the manufacturing layout is frozen.

DELIVERY1 × 40 ftMULTIMEDIA FILTRATION1 × 63 × 86 FRPCIP SYSTEM20 m³/h · 500 LCONTAINER SERVICESInterior lining · air conditioning · internal utilities

ENGINEERING & COMMERCIAL BOUNDARY

Reference platform, not an automatic guarantee.

Actual seawater, temperature, intake, final-water duty and site conditions govern the approved plant. The approved net equipment price is shown above. Transport, site work and final technical scope are confirmed in the project proposal.

Current full seawater analysisSeasonal temperature and intake conditionsGuaranteed capacity and membrane projectionRecovery, pressure and energy consumptionExact wetted-material gradesEnergy-recovery technology and efficiencyBattery limits and external interfacesFinal CWG commercial proposal

BOX DESAL SWRO 300 FAQ

Answers before project configuration.

01What is the reference capacity of BOX DESAL SWRO 300?

The reference platform is rated at 300 m³/day or 12.5 m³/h. Guaranteed production requires the actual seawater analysis, temperature and an approved membrane projection.

02How is BOX DESAL SWRO 300 containerized?

The reference delivery uses 1 × 40-foot container. Final access, segregation, ventilation, drainage and external battery limits are verified before layout approval.

03What seawater basis is used?

The current reference basis is 42,000–45,000 mg/L feed TDS, 40% nominal recovery and a 500 mg/L permeate target. These are preliminary design values, not universal guarantees.

04Is energy recovery included?

The reference energy-recovery section is 18.75 m³/h at 58–62 bar. Technology, efficiency and final operating point require project confirmation.

05What does the displayed price include?

The approved net equipment price covers a packed product at CWG warehouse, Braće Radića 132, Mraclin, Croatia (EXW). Transport and site work are quoted separately. Delivery is estimated at 12–18 weeks, subject to confirmation after order.

READY TO CONFIGURE BOX DESAL SWRO 300?

Send the seawater analysis and delivery conditions.

CWG will verify capacity, recovery, membrane projection, pretreatment, utilities, layout and final commercial scope.

Request project proposal Compare all BOX DESAL

SWRO300300m³/day