DESAL-SWRO PM-C · COMPACT FIXED-INSTALLATION SWRO
PM-300-C
1,250L/h
A source-confirmed compact configuration with verified HP pump, VFD status, unit dimensions, prefilter reference, STD code and approved net price.
MAXIMUM CONDUCTIVITY56,000µS/cm
STD-0100COMPACT PM-C CONFIGURATION
CONFIRMED PRODUCT30,000L/day7.5 kW HP pump€46,985 reference
1,250L/hNOMINAL OUTPUT
40,000ppmSOURCE FEED REFERENCE
7.5kWHIGH-PRESSURE PUMP
VFD ·YesCONFIRMED STATUS
STD-0100PUBLIC STD CODE
CONFIRMED PRODUCT DATA
Compact equipment data for preliminary selection.
The values below belong specifically to STD-0100. Unit dimensions and the prefilter or vessel reference are separate source fields.
Check capacity with FinderPRODUCTION PLANNING
Nominal water volume by operating time.
Use the arithmetic output for early storage and runtime planning, then verify the selected duty with actual seawater conditions.
Operating timeCalculated nominal volume
4 hours5,000L
6 hours7,500L
8 hours10,000L
12 hours15,000L
20 hours25,000L
Calculation: 1,250 L/h × operating hours. This is not a guaranteed project duty.CONFIRMED INSTALLATION ENVELOPE
740 × 1,380 × 760 mm
The separate source reference for the prefilter or vessel is Ø760 × V2100 mm. A complete installation layout also requires service access, valves, piping, drainage, electrical panels, intake equipment and product-water storage.
UNIT ENVELOPE740 × 1,380 × 760 mmPREFILTER / VESSELØ760 × V2100 mmHP PUMP7.5kWVFDYes
TECHNICAL DATA BOUNDARY
Confirmed equipment data is not a performance guarantee.
The following fields are absent from the current PM-C master record and remain unfilled.
Salt rejection and permeate qualityAverage operating pressureMaximum operating pressureRecommended and minimum inlet pressureBooster-pump powerDry and shipping massMembrane configuration and recoveryGuaranteed project performance
DESAL-SWRO-PM-300-C FAQ
Answers before the approved proposal.
01What is the confirmed output of DESAL-SWRO-PM-300-C?
The catalog record confirms 1,250 L/h or 30,000 L/day. Final guaranteed production still depends on verified seawater and approved operating conditions.
02Which pump and VFD data is confirmed for STD-0100?
The confirmed high-pressure pump rating is 7.5 kW and VFD is recorded as Yes. Booster-pump power is not confirmed.
03How should the dimensions be used?
The source unit envelope is 740 × 1,380 × 760 mm, with a separate prefilter or vessel reference of Ø760 × V2100 mm. A complete layout must add pipework, valves, electrical equipment, service clearance, drainage and storage interfaces.
04Is II–III a complete electrical specification?
No. II–III is retained exactly as source notation. Final voltage, phase arrangement, frequency, connected load and protection require selected-code confirmation.
05Is the approved net price a final quotation?
No. €46,985 is a approved net equipment price, excluding VAT and transport, EXW CWG Croatia. Technical scope follows project approval.
READY FOR PM-C CONFIRMATION?
Send seawater analysis, demand and installation data.
CWG will confirm STD-0100, pretreatment, electrical interfaces, guaranteed duty and final commercial scope.