DESAL-BWRO XP · COMPACT BRACKISH-WATER RO
DESAL-BWRO
XP30
Choose XP 30 at the top of the compact XP range when 125 L/h fits the duty and the measured source is routed to HL or L.
NOMINAL OUTPUT125L/h
HL + LCATALOG CONFIGURATIONS
Compact applicationsVILLAS · HOSPITALITY · LIGHT DUTY
125L/hNOMINAL OUTPUT
3,000L/day24-HOUR RATING
HL + LCATALOG CONFIGURATIONS
Engineering gateWATER ANALYSIS REQUIRED
CONFIRMED PRODUCT DATA
Highest XP platform for measured brackish-water duty.
Top XP capacity for compact brackish-water projects requiring up to 3 m³/day from an HL or L catalog configuration. The page now separates confirmed configuration data from still-missing fields. Final guaranteed performance and supplied scope remain subject to the water analysis and CWG proposal.
Check with Watermaker FinderCATALOG CONFIGURATION MATRIX
Match the exact XP route to measured water.
HL, L and M are feed-conductivity classes. LR is a permeate-quality configuration rated up to 10,000 µS/cm and is not a higher salinity class.
DESAL-BWRO XP 30HL
STD-0025€5,374approved net priceDESAL-BWRO XP 30L
STD-0026€5,374approved net priceConfiguration is only the first selection gate.Hardness, alkalinity, silica, iron, manganese, turbidity, SDI, organics, temperature and seasonal variation define pretreatment and approved operating conditions. Final commercial price and scope are confirmed in the CWG proposal.
PRODUCTION PLANNING
Convert operating time into nominal water volume.
Use this arithmetic for early storage and duty planning. It does not replace verified output, recovery or permeate-quality commitments.
Operating timeNominal calculated volume
8 hours1,000L
12 hours1,500L
16 hours2000L
24 hours3,000L
Calculation uses the displayed hourly rating; the 24-hour row uses the catalog daily rating of 3,000 L/day. Displayed values are preliminary planning figures.AVAILABLE XP 30 CONFIGURATIONS
HL + L routes for one nominal output.
Select the exact configuration only after measured conductivity and full source-water chemistry are reviewed.
01
HL CONDUCTIVITY CLASSDESAL-BWRO XP 30HL
Catalog code · STD-0025€5,374approved net price- 125 L/h nominal capacity
- 6,000 µS/cm rated feed route
- HL feed-conductivity configuration rated at 6,000 µS/cm.
02
L CONDUCTIVITY CLASSDESAL-BWRO XP 30L
Catalog code · STD-0026€5,374approved net price- 125 L/h nominal capacity
- 10,000 µS/cm rated feed route
- L feed-conductivity configuration rated at 10,000 µS/cm.
ANALYSIS · DUTY · PRETREATMENTWATER & SITE REVIEW
Capacity finds the platform. Chemistry protects it.
Conductivity & temperatureMeasured present value plus credible seasonal source-water range.Scaling chemistryHardness, alkalinity, silica and ions relevant to recovery.Fouling & pretreatmentTurbidity, SDI, iron, manganese, organics and microbiology.Site interfacesFeed supply, drain, power, storage, space and service access.
Send water analysis TECHNICAL DATA BOUNDARY
What the selected-code proposal must still confirm.
The source table confirms the XP 30 capacity, conductivity class, code and approved net price, but does not contain its detailed pressure, power, electrical, dimensional or permeate data.
Electrical supply and connected loadOperating pressure and pump dutyDimensions and installation layoutSalt rejection and reference permeate qualityDry mass and transport weightBooster-pump data, where applicableMembrane configuration and recoveryPretreatment and chemical-conditioning scopeControls, instruments and alarm functionsGuaranteed performance conditions
DESAL-BWRO XP30 FAQ
Answers before the technical proposal.
01How much water can DESAL-BWRO XP 30 produce?
The catalog rating is 125 L/h or 3,000 L/day at 24 hours of nominal operation. Actual guaranteed output depends on the approved configuration, feed-water chemistry, temperature, pressure, membrane condition and recovery.
02Which configurations are available for XP 30?
HL + L configurations are cataloged for XP 30. HL, L and M identify rated feed-conductivity routes. LR is a permeate-quality configuration and must not be interpreted as a higher salinity class.
03Can I select the configuration from a TDS estimate?
No automatic TDS-to-conductivity conversion is used for final selection. The conversion factor varies with dissolved-ion composition. Use a current laboratory analysis or calibrated conductivity measurement in µS/cm.
04Does nominal output guarantee final product-water quality?
No. Capacity and feed-conductivity route do not define the final permeate specification. Product-water quality, post-treatment, disinfection, storage hygiene and applicable requirements must be confirmed for the project.
05What is required before quotation?
Send source-water analysis, measured conductivity, temperature range, required daily and hourly output, intended water use, operating hours, utilities, installation constraints, storage and delivery location.
READY FOR CONFIGURATION REVIEW?
Send conductivity, analysis and required daily output.
CWG will confirm XP 30, the applicable HL + L route, pretreatment, recovery and final product-water specification.