≤ 4,400µS/cm
DESAL-BWRO KP
Lowest catalog conductivity classDESAL-BWRO Q · XP · KP · BRACKISH-WATER RO
Fresh water from
22.5 to 2,500 L/h
Catalog-based reverse-osmosis selection for measured brackish feed-water conductivity from 4,400 to 22,000 µS/cm.
FEED-WATER CONDUCTIVITY4,400–22,000µS/cm
DESAL-BWRO PLATFORMQ · XP · KP
DESAL-BWRO Q50–125 L/h
DESAL-BWRO XP22.5–125 L/h
DESAL-BWRO KP164–2,500 L/h
5 water classesMeasured conductivity
Engineering gateFinal configuration
QUICK ANSWER02
Which DESAL-BWRO system is right for my brackish water?
Start with a measured conductivity value. Select the matching WHL, HL, L, M or R catalog class, then choose the smallest model that covers the required hourly production. Use LR only when a higher permeate-quality configuration is required.
ENGINEERING KNOWLEDGE CENTER
Read the technical guide What is brackish water RO—and where is it used?
Review conductivity and TDS, treatment stages, pretreatment risks, applications and the verified Q, XP and KP selection route.
FEED-WATER CLASSIFICATION
Measured conductivity defines the DESAL-BWRO line.
Use conductivity from a current water analysis. The Finder does not automatically convert TDS to µS/cm because the conversion factor depends on water chemistry.
4,401–6,000µS/cm
DESAL-BWRO Q · XP · KP
Compact through industrial systems6,001–10,000µS/cm
DESAL-BWRO Q · XP · KP
Compact through industrial systems10,001–15,500µS/cm
DESAL-BWRO XP · KP
Higher brackish-water duty15,501–22,000µS/cm
DESAL-BWRO KP
Highest brackish catalog classConductivity selects the catalog class; full water chemistry defines pretreatment, recovery and membrane protection.
SEAMASTER DESAL-BWRO PRODUCT LINES
From compact supply to industrial production.
Each line combines a defined capacity range with catalog variants for specific feed-water conductivity.
01DESAL-BWRO-Q
DESAL-BWRO Q
Compact brackish-water production for homes and small facilities with a verified feed-water class.
CAPACITY50–125 L/h
CONDUCTIVITYUp to 10,000 µS/cm
CATALOG CLASSESHL · L
CATALOG OUTPUTS
50 · 96.25 · 125 L/h
02DESAL-BWRO-XP
DESAL-BWRO XP
Flexible compact range for villas, hospitality and light commercial duty, including LR permeate-quality configurations.
CAPACITY22.5–125 L/h
CONDUCTIVITYUp to 15,500 µS/cm
CATALOG CLASSESHL · L · M · LR
CATALOG OUTPUTS
22.5 · 45 · 49.17 · 67.5 · 96.25 · 125 L/h
03DESAL-BWRO-KP
DESAL-BWRO KP
Commercial and industrial brackish-water treatment for process water, irrigation and utility applications.
CAPACITY164–2,500 L/h
CONDUCTIVITYUp to 22,000 µS/cm
CATALOG CLASSESWHL · HL · L · M · R · LR
CATALOG OUTPUTS
63 approved configurations across six catalog routes
DESAL-BWRO Q MODEL RANGE
Three capacities. Two conductivity variants each.
Choose Q 12, Q 23 or Q 30 by required output, then select HL or L from measured feed-water conductivity. Codes and approved net prices are shown for each variant.
01
DESAL-BWRO QQ12
50 L/h1,200 L/day
- HL · 6,000 µS/cm
- STD-0007 · €3,765
- L · 10,000 µS/cm
- STD-0008 · €3,966
02
DESAL-BWRO QQ23
96.25 L/h2,310 L/day
- HL · 6,000 µS/cm
- STD-0009 · €4,201
- L · 10,000 µS/cm
- STD-0010 · €4,201
03
DESAL-BWRO QQ30
125 L/h3,000 L/day
- HL · 6,000 µS/cm
- STD-0011 · €4,460
- L · 10,000 µS/cm
- STD-0012 · €4,512
DESAL-BWRO XP MODEL RANGE
Six capacity groups. Four configuration routes.
Choose output from 22.5 to 125 L/h, then match HL, L or M to measured feed conductivity. LR remains a separate permeate-quality route.
01
DESAL-BWRO XPXP06
22.5 L/h540 L/day
- Available configurations
- HL · L · LR · M
- approved net price
- €3,935–€4,436
02
DESAL-BWRO XPXP11
45 L/h1,080 L/day
- Available configurations
- LR · M
- approved net price
- €4,875–€4,977
03
DESAL-BWRO XPXP12
49.17 L/h1,180 L/day
- Available configurations
- HL · L
- approved net price
- €4,687–€4,966
04
DESAL-BWRO XPXP16
67.5 L/h1,620 L/day
- Available configurations
- LR · M
- approved net price
- €5,332–€5,442
05
DESAL-BWRO XPXP23
96.25 L/h2,310 L/day
- Available configurations
- HL · L
- approved net price
- €4,897–€5,201
06
DESAL-BWRO XPXP30
125 L/h3,000 L/day
- Available configurations
- HL · L
- approved net price
- €5,374–€5,543
DESAL-BWRO KP VERIFIED CATALOG
63 approved configurations with prices.
All 63 rows have an approved STD code and net price. Detailed technical sheets are present for 42; 21 require model-specific documentation. Six KP-MR records remain excluded because their codes and prices are missing.
| Model | Class | Output | Daily rating | Feed limit | Code | approved net price |
|---|---|---|---|---|---|---|
| DESAL-BWRO-KP-45-WHL | WHL | 190L/h | 4,570L/day | 4,400µS/cm | STD-0027 | €7,330 |
| DESAL-BWRO-KP-45-HL | HL | 190L/h | 4,570L/day | 6,000µS/cm | STD-0028 | €7,668 |
| DESAL-BWRO-KP-45-L | L | 190L/h | 4,570L/day | 10,000µS/cm | STD-0029 | €8,898 |
| DESAL-BWRO-KP-40-LR | LR | 164L/h | 4,000L/day | 10,000µS/cm | STD-0030 | €10,245 |
| DESAL-BWRO-KP-45-M | M | 190L/h | 4,570L/day | 15,500µS/cm | STD-0031 | €10,198 |
| DESAL-BWRO-KP-45-R | R | 190L/h | 4,570L/day | 22,000µS/cm | STD-0032 | €11,212 |
| DESAL-BWRO-KP-90-WHL | WHL | 381L/h | 9,150L/day | 4,400µS/cm | STD-0033 | €8,203 |
| DESAL-BWRO-KP-90-HL | HL | 381L/h | 9,150L/day | 6,000µS/cm | STD-0034 | €9,335 |
| DESAL-BWRO-KP-90-L | L | 381L/h | 9,150L/day | 10,000µS/cm | STD-0035 | €11,452 |
| DESAL-BWRO-KP-80-LR | LR | 329L/h | 7,910L/day | 10,000µS/cm | STD-0036 | €12,865 |
| DESAL-BWRO-KP-90-M | M | 381L/h | 9,150L/day | 15,500µS/cm | STD-0037 | €11,998 |
| DESAL-BWRO-KP-90-R | R | 381L/h | 9,150L/day | 22,000µS/cm | STD-0038 | €14,255 |
| DESAL-BWRO-KP-135-WHL | WHL | 571L/h | 13,720L/day | 4,400µS/cm | STD-0039 | €9,452 |
| DESAL-BWRO-KP-135-HL | HL | 571L/h | 13,720L/day | 6,000µS/cm | STD-0040 | €12,556 |
| DESAL-BWRO-KP-135-L | L | 571L/h | 13,720L/day | 10,000µS/cm | STD-0041 | €13,110 |
| DESAL-BWRO-KP-120-LR | LR | 494L/h | 11,850L/day | 10,000µS/cm | STD-0042 | €15,202 |
| DESAL-BWRO-KP-135-M | M | 571L/h | 13,720L/day | 15,500µS/cm | STD-0043 | €14,752 |
| DESAL-BWRO-KP-135-R | R | 571L/h | 13,720L/day | 22,000µS/cm | STD-0044 | €17,466 |
| DESAL-BWRO-KP-180-WHL | WHL | 762.5L/h | 18,300L/day | 4,400µS/cm | STD-0045 | €13,252 |
| DESAL-BWRO-KP-180-HL | HL | 762L/h | 18,300L/day | 6,000µS/cm | STD-0046 | €13,695 |
| DESAL-BWRO-KP-180-L | L | 762L/h | 18,300L/day | 10,000µS/cm | STD-0047 | €15,546 |
| DESAL-BWRO-KP-160-LR | LR | 658L/h | 15,800L/day | 10,000µS/cm | STD-0048 | €18,103 |
| DESAL-BWRO-KP-180-M | M | 762L/h | 18,300L/day | 15,500µS/cm | STD-0049 | €16,887 |
| DESAL-BWRO-KP-180-R | R | 762L/h | 18,300L/day | 22,000µS/cm | STD-0050 | €19,403 |
| DESAL-BWRO-KP-225-WHL | WHL | 950L/h | 22,800L/day | 4,400µS/cm | STD-0051 | €15,236 |
| DESAL-BWRO-KP-225-HL | HL | 950L/h | 22,800L/day | 6,000µS/cm | STD-0052 | €16,985 |
| DESAL-BWRO-KP-225-L | L | 950L/h | 22,800L/day | 10,000µS/cm | STD-0053 | €17,654 |
| DESAL-BWRO-KP-200-LR | LR | 823L/h | 19,750L/day | 10,000µS/cm | STD-0054 | €20,155 |
| DESAL-BWRO-KP-225-M | M | 950L/h | 22,800L/day | 15,500µS/cm | STD-0055 | €19,453 |
| DESAL-BWRO-KP-225-R | R | 950L/h | 22,800L/day | 22,000µS/cm | STD-0056 | €21,152 |
| DESAL-BWRO-KP-270-WHL | WHL | 1,143.75L/h | 27,450L/day | 4,400µS/cm | STD-0057 | €16,231 |
| DESAL-BWRO-KP-270-HL | HL | 1,144L/h | 27,450L/day | 6,000µS/cm | STD-0058 | €18,220 |
| DESAL-BWRO-KP-270-L | L | 1,144L/h | 27,450L/day | 10,000µS/cm | STD-0059 | €20,145 |
| DESAL-BWRO-KP-240-LR | LR | 987L/h | 23,750L/day | 10,000µS/cm | STD-0060 | €23,780 |
| DESAL-BWRO-KP-270-M | M | 1,144L/h | 27,450L/day | 15,500µS/cm | STD-0061 | €21,665 |
| DESAL-BWRO-KP-270-R | R | 1,144L/h | 27,450L/day | 22,000µS/cm | STD-0062 | €24,586 |
| DESAL-BWRO-KP-320-WHL | WHL | 1,333.33L/h | 32,000L/day | 4,400µS/cm | STD-0063 | €19,896 |
| DESAL-BWRO-KP-320-HL | HL | 1,333L/h | 32,000L/day | 6,000µS/cm | STD-0064 | €21,332 |
| DESAL-BWRO-KP-320-L | L | 1,333L/h | 32,000L/day | 10,000µS/cm | STD-0065 | €23,230 |
| DESAL-BWRO-KP-290-LR | LR | 1,208.33L/h | 29,000L/day | 10,000µS/cm | STD-0066 | €25,260 |
| DESAL-BWRO-KP-320-M | M | 1,333L/h | 32,000L/day | 15,500µS/cm | STD-0067 | €24,350 |
| DESAL-BWRO-KP-320-R | R | 1,333L/h | 32,000L/day | 22,000µS/cm | STD-0068 | €27,250 |
| DESAL-BWRO-KP-360-WHL | WHL | 1,500L/h | 36,000L/day | 4,400µS/cm | STD-0069 | €20,304 |
| DESAL-BWRO-KP-360-HL | HL | 1,500L/h | 36,000L/day | 6,000µS/cm | STD-0070 | €22,745 |
| DESAL-BWRO-KP-360-L | L | 1,500L/h | 36,000L/day | 10,000µS/cm | STD-0071 | €23,989 |
| DESAL-BWRO-KP-310-LR | LR | 1,291.67L/h | 31,000L/day | 10,000µS/cm | STD-0072 | €26,746 |
| DESAL-BWRO-KP-360-M | M | 1,500L/h | 36,000L/day | 15,500µS/cm | STD-0073 | €26,875 |
| DESAL-BWRO-KP-360-R | R | 1,500L/h | 36,000L/day | 22,000µS/cm | STD-0074 | €32,243 |
| DESAL-BWRO-KP-400-WHL | WHL | 1,666.67L/h | 40,000L/day | 4,400µS/cm | STD-0075 | €22,766 |
| DESAL-BWRO-KP-400-HL | HL | 1,666.67L/h | 40,000L/day | 6,000µS/cm | STD-0076 | €23,652 |
| DESAL-BWRO-KP-400-L | L | 1,666.67L/h | 40,000L/day | 10,000µS/cm | STD-0077 | €28,746 |
| DESAL-BWRO-KP-400-M | M | 1,666.67L/h | 40,000L/day | 15,500µS/cm | STD-0078 | €31,221 |
| DESAL-BWRO-KP-400-R | R | 1,666L/h | 40,000L/day | 22,000µS/cm | STD-0079 | €36,255 |
| DESAL-BWRO-KP-500-WHL | WHL | 2,083.33L/h | 50,000L/day | 4,400µS/cm | STD-0080 | €27,335 |
| DESAL-BWRO-KP-500-HL | HL | 2,083.33L/h | 50,000L/day | 6,000µS/cm | STD-0081 | €30,977 |
| DESAL-BWRO-KP-500-L | L | 2,083.33L/h | 50,000L/day | 10,000µS/cm | STD-0082 | €33,886 |
| DESAL-BWRO-KP-500-M | M | 2,083.33L/h | 50,000L/day | 15,500µS/cm | STD-0083 | €34,210 |
| DESAL-BWRO-KP-500-R | R | 2083L/h | 50,000L/day | 22,000µS/cm | STD-0084 | €40,932 |
| DESAL-BWRO-KP-600-WHL | WHL | 2,500L/h | 60,000L/day | 4,400µS/cm | STD-0085 | €31,527 |
| DESAL-BWRO-KP-600-HL | HL | 2,500L/h | 60,000L/day | 6,000µS/cm | STD-0086 | €34,240 |
| DESAL-BWRO-KP-600-L | L | 2,500L/h | 60,000L/day | 10,000µS/cm | STD-0087 | €36,655 |
| DESAL-BWRO-KP-600-M | M | 2,500L/h | 60,000L/day | 15,500µS/cm | STD-0088 | €38,870 |
| DESAL-BWRO-KP-600-R | R | 2,500L/h | 60,000L/day | 22,000µS/cm | STD-0089 | €44,512 |
Approved net prices exclude VAT and transport; delivery is EXW CWG Croatia. Final technical scope is confirmed after water analysis. KP 40 LR, KP 225 R and KP 320 R retain their source-stated hourly ratings. For 21 configurations without a detailed technical row, the hourly display is calculated from the confirmed L/day rating and is not a supplier-guaranteed hourly performance.
CATALOG COVERAGE MATRIX
See which DESAL-BWRO lines cover each water class.
The table identifies catalog configurations by measured feed-water conductivity. Capacity selection happens inside the matching line.
| Feed conductivity | Class | DESAL-BWRO Q | DESAL-BWRO XP | DESAL-BWRO KP |
|---|---|---|---|---|
| ≤ 4,400 µS/cm | WHL | — | — | KP-WHL |
| 4,401–6,000 µS/cm | HL | Q-HL | XP-HL | KP-HL |
| 6,001–10,000 µS/cm | L | Q-L | XP-L / XP-LR | KP-L / KP-LR |
| 10,001–15,500 µS/cm | M | — | XP-M | KP-M |
| 15,501–22,000 µS/cm | R | — | — | KP-R |
LR denotes a permeate-quality configuration within applicable lower-conductivity models; it is not a sixth salinity class.
REPRESENTATIVE COMPACT SYSTEMENGINEERING SELECTION
Conductivity chooses the range. Water chemistry protects the system.
Measured conductivitySelects WHL, HL, L, M or R
Daily product-water demandDefines flow and operating hours
Pretreatment and recoveryBased on scaling and fouling risk
Required permeate qualityDefines standard or LR configuration
SEAMASTER WATERMAKER FINDER™
Open Finder Application. Feed water. Capacity.
Three inputs provide a catalog-based starting point and display the smallest qualifying DESAL-BWRO model before engineering review.
BRACKISH-WATER FAQ
Answers before model selection.
01How is the correct DESAL-BWRO line selected?
Selection starts with measured feed-water conductivity, then required product-water flow and application. The Finder shows the smallest qualifying catalog capacity before the project enters engineering review.
02Can conductivity in µS/cm be replaced with a TDS estimate?
No automatic conversion is used for model selection. Conductivity and TDS are related but the conversion factor varies with water chemistry. Use a current laboratory or calibrated field measurement in µS/cm.
03What does LR mean in the DESAL-BWRO range?
LR is a project-specific permeate-quality configuration. It is not a higher salinity or conductivity class and must be selected from the applicable catalog models.
04Why is water analysis required if conductivity is known?
Conductivity alone does not define fouling or scaling risk. Temperature, turbidity or SDI, hardness, alkalinity, iron, manganese, silica and other project-specific parameters influence pretreatment, recovery and membrane performance.
05Are the listed capacities final guaranteed outputs?
They are catalog ratings used for preliminary selection. Guaranteed output, recovery, product-water quality and operating limits are stated only in the final approved technical proposal.
WATER ANALYSIS AVAILABLE?
Send the report and required daily output.
We will confirm the DESAL-BWRO line, catalog model, pretreatment, recovery and final product-water specification.