DESAL-SWRO PM-B · SEAWATER REVERSE OSMOSIS
PM-63-B
260.42L/h
A source-confirmed PM-B configuration with verified pump, temperature, dimension, prefilter, STD code and reference-price data.
MAXIMUM CONDUCTIVITY56,000µS/cm
STD-0105PM-B CONFIGURATION
CONFIRMED PRODUCT6,250L/day3 kW HP pump€18,980 reference
260.42L/hNOMINAL OUTPUT
40,000ppmSOURCE FEED REFERENCE
3kWHIGH-PRESSURE PUMP
800 × 610 × 560 mmUNIT DIMENSIONS
STD-0105PUBLIC STD CODE
CONFIRMED PRODUCT DATA
One model, one visible source boundary.
The values on this page come from the approved master record for STD-0105. They are not extrapolated from another capacity.
Check capacity with FinderPRODUCTION PLANNING
Nominal water volume by operating time.
This arithmetic view supports early demand and storage planning. It is not a guaranteed duty point.
Operating timeCalculated nominal volume
4 hours1,041.68L
6 hours1,562.52L
8 hours2,083.36L
12 hours3,125.04L
20 hours5,208.4L
Calculation: 260.42 L/h × operating hours. Final output requires verified seawater and operating conditions.INSTALLATION ENVELOPE
Dimensions are confirmed. The complete layout is project-specific.
The unit envelope is 800 × 610 × 560 mm; the source prefilter reference is 435 × 350 mm. Allow additional space and interfaces for intake, valves, piping, electrical protection, drainage, brine discharge, service access and product-water storage.
Seawater intakeIntake location, feed route and protection.Service accessMaintenance clearance around pumps, filters and membrane components.Electrical confirmationII–III remains source notation; final electrical details require confirmation.Water interfacesProduct connection, flushing, sampling, drain and brine discharge.
TECHNICAL DATA BOUNDARY
Not available means not invented.
These fields remain pending for STD-0105 and must be confirmed in the selected-code datasheet or CWG proposal.
Salt rejection and permeate qualityAverage operating pressureMaximum operating pressureRecommended and minimum inlet pressureFeed pH rangeDry and shipping massMembrane configuration and recoveryGuaranteed performance conditions
DESAL-SWRO-PM-63-B FAQ
Answers before the technical proposal.
01How much water can DESAL-SWRO-PM-63-B produce?
The confirmed catalog capacity is 260.42 L/h or 6,250 L/day at the catalog planning basis. Actual and guaranteed output depends on seawater conductivity, temperature, pressure, membrane condition and the approved installation.
02Which pump data is confirmed for STD-0105?
The approved master confirms a 3 kW high-pressure pump and 0.95 kW booster pump. The source records VFD as “No”.
03Is II–III a final electrical specification?
No. II–III is the exact notation retained from the approved source. Voltage, phase arrangement, frequency, protection and connection requirements must be confirmed for the selected STD code in the CWG proposal.
04Is the displayed price the final purchase price?
No. €18,980 is the source-confirmed approved net price. Final price, taxes, delivery and supplied scope are defined only in the CWG commercial proposal.
05Which values are still unconfirmed?
Salt rejection, permeate quality, average and maximum operating pressure, recommended and minimum inlet pressure, feed pH, dry mass, membrane configuration, recovery and guaranteed performance conditions remain unconfirmed.
READY FOR MODEL CONFIRMATION?
Send seawater analysis, demand and installation data.
CWG will confirm STD-0105, the full electrical and process configuration, guaranteed duty and final commercial scope.